Skip to main content
voice-remover
Sign in

Lead and backing vocal splitterGuide

What Are Backing Vocals? Harmonies, Doubles and Layers

Learn what backing vocals add to a song. Hear a real lead, harmony and double apart and together, then see which file a vocal splitter puts each layer in.

Screenshot of the Lead and backing vocal splitter workspace
In this article
  1. What the lead does, and what backing vocals add
  2. Harmonies: the same words on different notes
  3. Doubles: the same notes, sung again
  4. Call and response, ad-libs and pads
  5. What a vocal splitter does with each layer
  6. Which file do you need
  7. Backing vocals, back vocals, background vocals

Backing vocals are every sung part in a song other than the lead: the harmony above the melody, the second take that thickens it, the voices that answer a line. They support the lead singer instead of carrying the tune. The quickest way to understand backing vocals is to hear them without the lead, so this page starts with a real chorus taken apart: one lead, one harmony and one double, each on its own button.

A chorus, one voice at a time

The performers’ own tracks from an openly licensed multitrack recording, each at the level it has in the mix. Press play and switch parts: nothing to upload.

  • Lead vocal10:25
  • Harmony (a third above)20:00 / 0:25
  • Double (same notes)30:25
  • Lead + harmony40:25
  • Lead + double50:25
  • All three voices60:25
  • Full mix, with guitars70:25

Rainfall · Liz Nelson & Jennifer Davies · CC BY-SA 4.0. The singers’ own tracks from the MedleyDB multitrack, 1:01 to 1:26, at the level each has in the mix; shared under the same licence. Source recordings, not output of a tool.

Split a song of your own with the Lead and backing vocal splitter

The recording is "Rainfall" by Liz Nelson and Jennifer Davies, published with its separate tracks in the MedleyDB research collection. It has three vocal tracks, an acoustic guitar and an electric guitar. Nothing above was separated by software. These are the tracks as the singers recorded them, so each button plays one performance, or a plain sum of two or three.

Part 1What the lead does, and what backing vocals add

Play Lead vocal first. One voice, the melody, every word. A song can stop there, and the first verse of this one does: for its first 43 seconds nobody else sings.

Now play All three voices, then go back to the lead. The melody has not changed. What changed is its weight. The chorus sounds wider and more settled, and that is the job of backing vocals: they mark the section that matters and fill the space around the lead.

They do it quietly. In this chorus the harmony sits 7.8 dB under the lead and the double 10.8 dB under it, measured as the integrated loudness of each track on these excerpts. That is why the solo buttons sound faint: every part plays at the level it has in the mix. Backing vocals are mixed to be felt more than noticed, and soloing them shows how little it takes.

Part 2Harmonies: the same words on different notes

Play Harmony (a third above), then Lead + harmony. The second singer has the lead's words and rhythm on different notes. We tracked the pitch of both voices. While they sing together, the harmony is three or four semitones above the lead for 67% of the time and five semitones above for another 17%.

Three or four semitones is a third, the most common harmony interval in pop, folk and country singing. A line a third away follows the shape of the melody and still sounds like a chord with it.

Harmonies also go under the melody. Earlier in the same song, the third vocal track does that:

Eighteen seconds earlier: a harmony under the lead

The performers’ own tracks from an openly licensed multitrack recording, each at the level it has in the mix. Press play and switch parts: nothing to upload.

  • Lead vocal10:13
  • Harmony (below the lead)20:00 / 0:13
  • Lead + lower harmony30:13
  • Full mix, with guitars40:13

Rainfall · Liz Nelson & Jennifer Davies · CC BY-SA 4.0. The singers’ own tracks from the MedleyDB multitrack, 0:43 to 0:56, at the level each has in the mix; shared under the same licence. Source recordings, not output of a tool.

Split a song of your own with the Lead and backing vocal splitter

Here the extra voice comes in at 0:43 and stays low. It is two, three or five semitones under the lead for 57% of the time they overlap, and on the lead's own note for only 17%. A lower harmony is harder to pick out than a higher one, because the ear follows the top line. Solo it once and you will keep hearing it in the mix.

Part 3Doubles: the same notes, sung again

Back in the chorus, play Double (same notes) and then Lead + double. This is the same vocal track that sang the low harmony a moment ago, now doing a different job: it sings the melody along with the lead. In this chorus it is on the lead's note in 56% of the moments they overlap, and one or two semitones away for another 31%.

A double is not a copy. When both voices hold the same note here, they are 22 cents apart on average (a cent is a hundredth of a semitone), and the two waveforms do not match (their correlation is −0.04, where a copy would give 1). Those small disagreements are what a double is for. Two takes that almost match sound thicker and steadier than either one alone. Pasting a copy of the lead onto a second track gives none of that. It only makes the lead louder.

This track also shows what the name means. The same track is a harmony in one section and a double in the next. "Backing vocal" describes a role in the arrangement, not a person: whoever is not carrying the melody at that moment is backing.

Part 4Call and response, ad-libs and pads

Three more kinds of backing vocal are common. This recording has none of them, so there is nothing to play for this part.

  • Call and response. The lead sings a line and other voices answer in the gap. It is the one kind of backing vocal that sings while the lead is silent. We checked this song for it: in all 4 minutes 45 seconds, neither backing track sings for as long as 0.8 seconds while the lead rests.
  • Ad-libs. Short improvised phrases around the main line, often the lead singer on another track.
  • Pads. Held "ooh" and "aah" notes with no words, used like a keyboard chord under a verse.

Part 5What a vocal splitter does with each layer

If all you have is the finished song, software has to pull these layers apart. Which layers you want decides which tool to use.

Everything sung, in one file. A vocal remover splits a song into a vocal file and an instrumental. The vocal file holds every singer, lead and backing alike.

The lead in one file, the backing vocals in another. The lead and backing vocal splitter makes that same split, then divides the vocal once more. We ran the same 25 seconds of the finished mix through it, then measured how much of each real track ended up in each file it returned. Each row is a file you download, each column one of the singers' own tracks, and the figures are in dB against that track's real level:

FileLeadHarmonyDouble
Lead vocal−0.7−37−19
Backing vocals−36−0.6−2.1
Instrumental−40−45−23

A figure near 0 means the whole track is in that file; −20 is a tenth of its level. The harmony went to the backing file almost intact. So did the double, although it sings the lead's notes. About a tenth of it stayed in the lead file, where it is a faint second voice. Add the two vocal files back together and all three singers are within 1 dB of their real level, so nothing sung was lost on the way.

The same chorus, split from the finished mix

Real output from the Lead and backing vocal splitter page, on openly licensed recordings. Press play and switch versions: no upload, no run used.

  • Original10:25
  • Lead vocal20:00 / 0:25
  • Backing vocals30:25
  • Instrumental40:25

Rainfall · Liz Nelson & Jennifer Davies · CC BY-SA 4.0. MedleyDB mix, 1:01 to 1:26, where two harmony singers join the lead; shared under the same licence. 25 s of real output of this page.

Try it on your own file

A double does not always come away this cleanly. The model tells voices apart by how they sound, so a second singer can be separated, as here. When one singer double-tracks herself in the same tone, the two takes have less to tell them apart, and more of the double can stay in the lead file. We have not measured that case here, so listen to the lead file before you rely on it.

Part 6Which file do you need

You want toUse
Sing the lead yourself over the original harmoniesThe splitter’s result: switch to Hear the mix, mute Lead vocal, download the mix
Learn a harmony part by earThe Backing vocals file on its own, then with the lead
Take a clean lead for a remixThe Lead vocal file; listen for a leftover double first
Keep the whole vocal arrangementThe vocal file from the vocal remover or the acapella extractor
Remove every voiceThe instrumental from the vocal remover or the karaoke maker

The splitter returns three files: the lead and the backing vocals as 32-bit float WAV, the instrumental as 24-bit WAV. They start where the song starts and add back up to it, so they line up in any editor. A new file takes one to three minutes.

If the backing file comes back almost silent, the page says so. Either the song has no backing vocals, or they sit too close to the lead to pull apart. Try one chorus before a whole album: 25 seconds was enough for everything on this page.

For the whole vocal in one file, the acapella extractor and the vocal remover do the same split with different files in front. The karaoke maker hands you the instrumental first.

If you separate on your own computer instead, our test of the Ultimate Vocal Remover best settings measured how much of the backing vocals each of its models leaves in the instrumental.

For an interview or podcast with music under the speech, the voice remover separates the spoken track from that background music.

Part 7Backing vocals, back vocals, background vocals

They are the same thing. "Backing vocals" is the usual studio term, "background vocals" appears in many American album credits, and "back vocals", "backup vocals", BVs and BGVs are shorthand for both. One part on its own is a backing vocal. The people credited may be session singers, members of the band, or the lead singer recorded again on extra tracks, as on many solo records.

Whatever the credit says, the test is the one from the top of this page. Find the voice that carries the melody. Everything else that is sung is a backing vocal, and now you know three of the jobs it can be doing.

Last updated Nov 16, 2026. The figures here come from our own measurements, written up on each tool's page. When a tool changes, this page is checked again.

Every song is two songs.

The voice, and everything around it.

Take one away. Keep the other.

In about a minute, both are yours.

Another song? Drop it here.

It goes straight into the Lead and backing vocal splitter.
Best with headphones.